 |
|
|
| |
|
|
|
|
|
|
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
|
|
| |
|
|
Build Your Online Product Catalogs?
| Product Name: |
Casting Cast Iron Straight Edges Edge Precision
|
| Supply Ability: |
900 |
| Related proudcts |
|
| Specifications |
DF-890 |
| Price Term: |
FOB |
| Port of loading: |
TIANJIN,CHINA |
| Minimum Order |
|
| Unit Price: |
|
|
Cast Iron Straight Edges are widely used for setting up and leveling machinery and for checking and spotting bearing surfaces during hand scrapping operations. Properly supported, they may be used with various indicating devices to check surface flatness of large Machined areas like Surface Tables, Machine Tables & Beds, Machine guide ways, etc.
SALIENT FEATURES:
Offered in two types viz. Bow shaped or Camel Back type and I-Section or Parallel type, made generally as per IS-5268- 1991.
Bow shaped Straight Edges are provided with pads on their bow for supporting Engineer's Level.
Made from close grained Cast Iron Castings conforming to Grade FG-220 of IS-210. Casting duly stress relieved.
Offered in hand-scrapped finish to various Grades.
High spots uniformly distributed. Proportion of bearing area of the working surface not less than 20% for Grade-0 and Grade-1 and not less than 10% for Grade- 2 accuracy Straight Edges.
Flatness of side faces: Any 300 mm length flat within 25 microns for Grade-0, Grade-1 and within 50 microns for Grade-2.
Squareness of working surfaces and side faces when checked with side face laid on Grade-1 Surface Plate:
For Grades-0 and 1 : Within 8 microns per 25 mm
For Grade-2: Within 15 microns per 25 mm
Parallelism of side faces:
For Grades-0 and 1: Not exceeding 30 microns per 300 mm and 60 microns over total length.
For Grade-2 : Not exceeding 60 microns per 300 mm and 120 microns over any total length.
Supplied with rexine cover for protection of working surfaces.
Actual dimensions of Straight Edges may be more than those stated in the Tables.
STANDARD SIZE FOR CAMEL BACK/BOW TYPE & TOLERANCE ON FLATNESS AND PARALLELISM
Length of
St. Edge
Min. width of
working face
Min. overall
depth
Min. flange
thickness
Tolerance on flatness and parallelism
Grade-0
Grade-1
Grade-2
(mm)
(mm)
(mm)
(mm)
(μm)
(μm)
(μm)
300
30
80
10
2
3
6
500
35
130
12
3
5
10
800
40
175
14
3
6
10
1000
45
180
16
|
| Company: |
Cangzhou Zhongbo Heavy Industry Co.,Ltd
|
| Contact: |
Mr. JASON KOOL |
| Address: |
#255 Fuzhuang Industry Zone,Botou City, Hebei Province,China |
| Postcode: |
062150 |
| Tel: |
86 0317 8269155 |
| Fax: |
86 0317 8181444 |
| E-mail: |
|
|
|
Home
